Category: FPV (First Person Video)
-
Bix3 – FPV Flight at Hansen Dam
Here’s a very peaceful flight at the Hansen Dam, onboard the Bix3 from Hobbyking
-
Bix3 – Maiden FPV Flight – Apollo Field
Here is the maiden FPV flight of the Bix3 from Hobbyking.
-
Mini Tricopter Maiden FPV Flight
This is the maiden FPV flight of my Mini Armattan FPV Tricopter. More info about this frame click here
-
Rippin’ it Up
Getting more comfortable with the Swift Hex, my 3D printed 300mm mini hex frame. Loving the Naze32. These are my first rolls. Check out the maiden FPV video below.
-
Swift Hex – 300mm 3D Printed Hex Frame
Introducing the Swift Hex, a mini sized hexacopter that I designed and 3D printed, specifically for FPV. Its design was inspired by the Blackout Spider Hex, but seeing as it is currently unavailable, I decided to designed and make my own. It is exactly 300mm motor to motor. It uses 37mm spacers, just because that […]
-
A is for Azusa
After seeing these letter on the side of the foothills all over Southern California, I decided to try to fly close to them via FPV. Here is me second attempt (the first one was B is for Burbank, click here to watch that video). Please excuse the excessive jello and vibes; the CC3D controller isn’t […]
-
Hansen Dam FPV – Warbler
Location: Hansen Dam in Southern California. Airplane: Warbler (scratch-built. more info here). Control: Taranis + HawkEye OpenLRS Video: Immersion RC 5.8 ghz. 5 Turn Helical on goggles.
-
Warbler UAV – Scratch-built FPV Platform
They say imitation is the sincerest for of flattery, and in this case, the creators of the Talon UAV should be extremely flattered. Introducing my latest FPV platform, the Warbler UAV. Needless to say, it was heavily inspired by the Talon UAV. After some sketching and planning, I decided my try building a similar plane, […]
-
B is for Burbank – FPV Flight
One of my FPV goals was to fly around and take video of the big letter B in the foothills of Burbank and today I’ve met that goal! My flight times are about 12-15 minutes on 2 x 2,200 3S lipos, on my scratch-built J-Twin airplane (for more information about it click here). I’m using […]
-
J-Twin: Scratch-built FPV Platform
Introducing the J-Twin, a twin-motor airplane I designed and built specifically for FPV. I took it for its maiden flight today and I behaved amazingly well, just a click or two of aileron trim and it was all set. The center of gravity is approximately at 1/3 of the wing chord and it didn’t present […]