FliteReport

Category: Featured

  • Durafly P-40N from Hobbyking – 1st Impressions & Assembly

    Durafly P-40N from Hobbyking – 1st Impressions & Assembly

    Presenting Hobbyking’s newest model airplane from the Durafly line, the Curtiss P-40N Warhawk. I ordered it the day it came out from the US West Warehouse (click here to get yours) and received it 4 working days later, via FedEx ground. Here is my first impressions and assembly video. I am really impressed with the […]

  • Caliber FPV Wing – Review Part 1 – Unboxing and Assembly

    Caliber FPV Wing – Review Part 1 – Unboxing and Assembly

    Introducing the Caliber FPV Wing from Snipe Air Industries. In this video I introduce the project, unbox the package and show you the finished product after it was put together. It measures 37.5 inches (95.25 cm) in wingspan and the kit includes all the nessary hardware, including a plastic center section to hold the fpv […]

  • The Ghoul Part 2: Assembly – Building a better Phantom

    The Ghoul Part 2: Assembly – Building a better Phantom

    Here’s part 2 of the Build a Better Phantom Series: a quad with T-Motors, SimonK ESCs and an APM Mini flight controller in a Phantom shell: The Ghoul. Please visit the first part of the series to get a list of components by clicking here. Here are links to additional guides and documents needed to […]

  • The Ghoul: Building a Better DJI Phantom – Part 1

    The Ghoul: Building a Better DJI Phantom – Part 1

    Introducing the Ghoul: a quad built with a DJI Phantom Shell, but with better components and more capabilities. I came across a DJI Phantom Shell while navigating ReadyToFlyQuads.com and decided to build a quad using that shell and powering it with a Mini APM and overall better components. This is what is needed: RTF OPERA QUAD […]

  • Custom Designed 3D Printed Y6 Multirotor

    Custom Designed 3D Printed Y6 Multirotor

    Introducing my custom designed and 3D printed Y6 multirotor. After many hours of designing, printing, troubleshooting and test flying, I am finally showcasing my latest multirotor with the world. The frame base, motor holders, landing gear and 3-axis gimbal were printed 3D printed in ABS. The booms are carbon fiber tubes that are 330 mm […]

  • Durafly Das Ugly Stik Maiden Flight – Review Part 2

    Durafly Das Ugly Stik Maiden Flight – Review Part 2

    Here’s the second part of the review of the Durafly Das Ugly Stik, maiden flight. Overall, I think Hobbyking hit it out of the park with this one: it came very well packaged, putting it together was a breeze and the maiden flight was uneventful. The plane flew like it was on rails with the […]

  • Durafly Das Ugly Stik Unboxing & Assembly – Review Part 1

    Durafly Das Ugly Stik Unboxing & Assembly – Review Part 1

    Here’s the first part of my video review of the Durafly Das Ugly Stik, unboxing and assembly. Overall, I think Hobbyking hit it out of the park with this one: it came very well packaged, putting it together was a breeze and the maiden flight was uneventful. The plane flew like it was on rails […]

  • Mini Tricopter Maiden FPV Flight

    Mini Tricopter Maiden FPV Flight

    This is the maiden FPV flight of my Mini Armattan FPV Tricopter. More info about this frame click here

  • Rippin’ it Up

    Rippin’ it Up

    Getting more comfortable with the Swift Hex, my 3D printed 300mm mini hex frame. Loving the Naze32. These are my first rolls. Check out the maiden FPV video below.

  • A is for Azusa

    A is for Azusa

    After seeing these letter on the side of the foothills all over Southern California, I decided to try to fly close to them via FPV. Here is me second attempt (the first one was B is for Burbank, click here to watch that video). Please excuse the excessive jello and vibes; the CC3D controller isn’t […]